CALL SUPPORT
+994 50 406 30 77
EMAIL SUPPORT
avista@bakustock.com
LOCATION
str. Nizami 131/27
+994 50 406 30 77
avista@bakustock.com
str. Nizami 131/27
AVISTA LLC is authorized distributor of Ingersoll Rand ARO Pumps. We ship worldwide directly from Ingersoll Rand ARO warehouse.
Broad chemical compatibility, with automation and remote control capability. ARO EXP diaphragm pumps feature flow rates up to 285 GPM (1079 LPM) and offer a wide range of material and porting configurations. EXP Series pumps are available with Electronic Interface capability, solenoid actuation for accurate cycle rate control, and long-life PTFE diaphragms, providing a 2-time increase in service life over standard PTFE*.
Reliable bulk fluid transfer, from inks and solvents to glues and adhesives. ARO PRO series pumps offer the ability to vary the flow outlet and discharge pressure as low as 0.26 gallons (1 liter) per minute up to 275 gallons (1040 liter) per minute for our larger sizes and adjust fluid pressure up to 123 p.si. (8.5 bar), by using just an air filter / regulator and a needle valve.
ARO FDA-compliant pumps are designed to transfer fluid efficieARO FDA-compliant pumps are designed to transfer fluid efficiently and safely. Our sanitary pumps combine the heavy duty reliability of our EXP diaphragm pump series with the capacity to handle high volume transfer and fluid dispensing. ntly and safely. Our sanitary pumps combine the heavy duty reliability of our EXP diaphragm pump series with the capacity to handle high volume transfer and fluid dispensing.
The ARO Electronic Interface Pump provides accurate, electronically controlled dosing, with factory-installed cycle counter and leak detection kits.
Model No 66605X-XXX
Maximum Flow gpm (lpm): 13 (49.2)
Maximum Discharge Pressure psi (bar): 100 (6.8)
Fluid Ports Inlet/Outlet (bsp): 1/2-14 N.P.T.F.-1
Material of Construction:
Polypropylene, Groundable, Acetal, PVDF
Maximum Solids in (mm): 3/32 (2.4)
Maximum Dry Suction Lift ft (m): 15 (4.5).
Model No 66607A-XXX-A
Maximum Flow: 33 gpm (125 lpm)
Maximum Discharge Pressure: 120 psi (8.3 bar)
Fluid Ports Inlet/Outlet:3/4 – 14 NPTF-2 Rp 3/4(3/4-14 BSP parallel)
Material of Construction: Aluminum
Maximum Solids: 1/8 inch (3.2 mm)
Maximum Dry Suction Lift: 17 ft (5.2 m)
+994 50 406 30 77
avista@bakustock.com
str. Nizami 131/27, Baku
