Standard Features:
- All steel or stainless steel construction.
- Compact design
- Design factor 10:1 on main load bearing components
- Design temperature: -20°C
- Planetary gear box enclosed in drum for better protection and space saving
- Gear type air motor
- High efficiency planetary gearing inside drum for better protection and minimum overall dimensions
- All rotating parts are supported on ball and/or needle bearings
- One internal automatic multidisc brake springs applied, pressure released
- One external automatic drum band brake spring applied, pressure released
- Helical grooved drum (for wire rope diameter 10 mm)
- Local throttle control with automatic return to neutral position and locks when released.
- Main power emergency stop device
- Overload protection device adjusted during factory tests
- 3 way valve with 2 air inlets. Secondary air inlet to be connected by the customer to an auxiliary power supply source on site (e.g. a nitrogen bottle) for emergency operation in case of main power failure.
- Emergency lowering system (2 litre tank releasing both brakes)
- Slack wire detector
- Adjustable upper and lower limit switches inside the drum
- Assisting spooling device for better rope winding at no load (Press roller)
- Stainless steel drum guards
- Marine Paint (150 microns)
- Water separator-Filter-Regulator-Lubricator set
- Lifting lugs for easy installation “DNV” Type approved design
- CE marking and ATEX marking for Zone 1 and 2 (EX II 2 GD c IIB 135°C X)
Technical Data with 6.3 dynamic working pressure:
- Nominal lifting capacity at 2nd rated layer: 150 kg
- Working pressure range: 5 to 7 bar
- Lifting speed at rated load: 0 to 30 m/min.
- Free air consumption: 0 to 2.5 m3/min
- Wire rope diameter: 10 mm (not included in this quote)
- Working rope capacity: 54 meters (on 2 layers)
- Full drum storage rope capacity: 152 m (on 5 layers)
- Weight of winch (without rope): approx.210 kg
Options included:
- 150 m of 10 mm diameter non rotating, galvanized wire rope equipped with a thimble and sleeved at one end, spooled on the winch at factory
AVISTA LLC is authorized distributor of Ingersoll Rand. We ship worldwide directly from IR factory. Contact us
